Graco tested this lightweight 3-across car seat in every configuration, to help ensure your growing family can fit in your vehicle, even with children of different ages who ride in different modes, or when paired with select other Graco car seats. Integrated belt lock-off makes for easy vehicle seat belt installation in forward-facing mode, and allows you to position your seats to maximize space with 3 across. Graco’s exclusive push-button InRight™ LATCH provides an easy, one-second attachment with an audible click to help ensure secure installation.
Graco made thoughtful design choices to make the SlimFit3 easy to adjust with 3 car seats in the back seat. The No-Rethread Simply Safe Adjust™ Harness System allows you to adjust the height of the headrest and harness to 10 positions with just one motion for just the right fit. Easily adjust the 4-position recline for a better installation and a comfortable ride. The Rapid Remove cover comes off in 60 seconds, without uninstalling the seat or removing the harness, and is machine washable.
Breathable mesh AirFlow channels provide improved ventilation to keep your child cool and comfortable. Two cup holders are designed to work with the three-across configuration to keep drinks and snacks close at hand. Fuss-free harness storage pockets conveniently hold the harness out of the way while your child gets in and out. Removable, plush head and body inserts help to keep your infant feeling cradled and comfortable. The steel-reinforced frame provides strength and durability for years of use, and EPS energy-absorbing foam provides effective impact energy management. This car seat is Graco® ProtectPlus Engineered™ to help protect in frontal, side, rear, and rollover crashes.
*Please keep your receipt in a safe place, if you cannot produce your receipt or you are not the original purchaser or the seat was purchased prior to 1st June 2023 it refers back to date of manufacture.
A very common concern for parents is what to do when it seems that you’ve tightened your child’s car seat and the harness is uneven. One of the straps is tight but the other is still very loose. We would recommend trying these troubleshooting steps below to see if it solves the problem.
No-Rethread Harness Troubleshooting Steps:
When loosening the harnesses pull both harness straps out at the same time, pulling one side can cause them to become uneven.
Next, we would like to walk you through the steps of resetting the Harness Straps.
First, raise the head rest to the highest position, fully loosen the harnesses and then fully tighten them.
You will then need to lower the head rest to lowest position, fully loosen the harnesses and then fully tighten them.
Repeat these steps one more time.
| Age Range | Birth - 8+ years (approx) |
|---|---|
| Airplane Approved | This child restraint is certified for use in aircraft when using the harness system. USA airline approved |
| Energy Absorbant Foam | Yes |
| Expiry Date | 10 years from date of purchase |
| Forward Facing | 10 - 30 kg forward facing 5pt harness 18.1 - 45 kg booster mode |
| Harness | 5 point safety harness |
| Height Range | Rear-facing height 125 cm or less, Forward-facing harness height 125 cm or less, Booster mode 110.1 cm to 145cm and at least 4 years old |
| ISOFIX | Yes LATCH, for use up to 20 kg. |
| Level Indicators | Yes |
| Manufacture Warranty | 1 year |
| NZ Standard S Mark | Yes |
| Product Depth | 52.5 cm |
| Product Width | 42.4 cm |
| Product Height | 62.2 cm |
| Product Weight | 8.7 kg |
| Rearward Facing | 2.2 - 18 kg |
| Seat Belt System | 3 point seat belt or lap belt. Ok to use with over lapping seat belts, check that the lower anchor belt or seat belt must not rub on each other or interfere with each other when installing the seat. |
| Side Impact Protection | Yes |
| Top Tether | NHTSA (National Highway Traffic Admin US) requires Graco to pass testing both with and without the top tether. However, we highly recommend using the top tether when forward facing. |
| Washable Covers | Machine washable (delicate cycle)|Rapid Remove machine washable cover removes in 60 seconds, without uninstalling the seat |
| Weight Range | Rear Facing: 2.2 - 18 kg, Forward Facing Harness: 10 - 30 kg, Full Booster: 18.1 - 45 kg |
Check in store stock at your nearest store
Graco tested this lightweight 3-across car seat in every configuration, to help ensure your growing family can fit in your vehicle, even with children of different ages who ride in different modes, or when paired with select other Graco car seats. Integrated belt lock-off makes for easy vehicle seat belt installation in forward-facing mode, and allows you to position your seats to maximize space with 3 across. Graco’s exclusive push-button InRight™ LATCH provides an easy, one-second attachment with an audible click to help ensure secure installation.
Graco made thoughtful design choices to make the SlimFit3 easy to adjust with 3 car seats in the back seat. The No-Rethread Simply Safe Adjust™ Harness System allows you to adjust the height of the headrest and harness to 10 positions with just one motion for just the right fit. Easily adjust the 4-position recline for a better installation and a comfortable ride. The Rapid Remove cover comes off in 60 seconds, without uninstalling the seat or removing the harness, and is machine washable.
Breathable mesh AirFlow channels provide improved ventilation to keep your child cool and comfortable. Two cup holders are designed to work with the three-across configuration to keep drinks and snacks close at hand. Fuss-free harness storage pockets conveniently hold the harness out of the way while your child gets in and out. Removable, plush head and body inserts help to keep your infant feeling cradled and comfortable. The steel-reinforced frame provides strength and durability for years of use, and EPS energy-absorbing foam provides effective impact energy management. This car seat is Graco® ProtectPlus Engineered™ to help protect in frontal, side, rear, and rollover crashes.
*Please keep your receipt in a safe place, if you cannot produce your receipt or you are not the original purchaser or the seat was purchased prior to 1st June 2023 it refers back to date of manufacture.
A very common concern for parents is what to do when it seems that you’ve tightened your child’s car seat and the harness is uneven. One of the straps is tight but the other is still very loose. We would recommend trying these troubleshooting steps below to see if it solves the problem.
No-Rethread Harness Troubleshooting Steps:
When loosening the harnesses pull both harness straps out at the same time, pulling one side can cause them to become uneven.
Next, we would like to walk you through the steps of resetting the Harness Straps.
First, raise the head rest to the highest position, fully loosen the harnesses and then fully tighten them.
You will then need to lower the head rest to lowest position, fully loosen the harnesses and then fully tighten them.
Repeat these steps one more time.
| Age Range | Birth - 8+ years (approx) |
|---|---|
| Airplane Approved | This child restraint is certified for use in aircraft when using the harness system. USA airline approved |
| Energy Absorbant Foam | Yes |
| Expiry Date | 10 years from date of purchase |
| Forward Facing | 10 - 30 kg forward facing 5pt harness 18.1 - 45 kg booster mode |
| Harness | 5 point safety harness |
| Height Range | Rear-facing height 125 cm or less, Forward-facing harness height 125 cm or less, Booster mode 110.1 cm to 145cm and at least 4 years old |
| ISOFIX | Yes LATCH, for use up to 20 kg. |
| Level Indicators | Yes |
| Manufacture Warranty | 1 year |
| NZ Standard S Mark | Yes |
| Product Depth | 52.5 cm |
| Product Width | 42.4 cm |
| Product Height | 62.2 cm |
| Product Weight | 8.7 kg |
| Rearward Facing | 2.2 - 18 kg |
| Seat Belt System | 3 point seat belt or lap belt. Ok to use with over lapping seat belts, check that the lower anchor belt or seat belt must not rub on each other or interfere with each other when installing the seat. |
| Side Impact Protection | Yes |
| Top Tether | NHTSA (National Highway Traffic Admin US) requires Graco to pass testing both with and without the top tether. However, we highly recommend using the top tether when forward facing. |
| Washable Covers | Machine washable (delicate cycle)|Rapid Remove machine washable cover removes in 60 seconds, without uninstalling the seat |
| Weight Range | Rear Facing: 2.2 - 18 kg, Forward Facing Harness: 10 - 30 kg, Full Booster: 18.1 - 45 kg |
